Loading... Please wait...
- Home
- Plumbing
- Fragola Performance Systems
- Fragola Hoses
- Fragola 8000 Push-Lok General Purpose Hose
Categories
- Accessories
- Garage Sale
- Cooling
- Driveline
- Electrical & Ignition
- Engine & Performance Parts
- Exterior
- Fuel System
- Science of Lighting by Baja Designs
- Suspension
- Storage
- Wheels
- Tires
- Lubricants
- Motorsport
- Offroad Gear
- Plumbing
- Reinforcements & Armor
- Roll Cages
- Safety
- Skid Plates, Bumpers & Side Steps
- Steering
- Winches & Accessories
Related Products
Fragola 8000 Push-Lok General Purpose Hose
Hover over image to zoom
Product Description
Fragola Push-Lite Series Race Hose is manufactured to the same rigorous standards of our 3000 Series Stainless Race Hose, the Push-Lite Hose is the perfect alternative when cost or weight is the main consideration.
- 250 PSI, maximum working pressure allows for most automotive water, oil, and fuel system.
- Inner layer of synthetic PKR covered with a fiber braid reinforcement and wrapped with a weather-resistant textile cover.
- Temperature range to 300F.
- Hose assemblies with Push-Lite Hose are over half the weight of the same stainless hose assembly.
- For high heat or higher-pressure applications, we recommend Fragola light-weight stainless band clamps.
| Please note: On bulk lengths of hose over 20 feet, FPS reserves the rights to ship plus or minus 15% in length , in order to reduce the number of unsellable pieces. If you need a specific length for your job, please notify your sales person of the minimum acceptable length. |
| 8000 Series Push-Lite may be used in any number of automotive applications. If you are using fittings other than our 8000 Series Push-Lite Hose Ends, be sure to measure the hose barb diameter to determine the suitability. This hose is sized fractionally, but the suitability is at the sole determination of the end user.
Tech Tip: To ease the installation of any push on hose end, first dip the end of the hose in boiling water to soften it slightly (a heat gun also works well). Clamp the hose in a vise and oil the barbs with common motor oil. Push the hose over the barbs with one smooth movement. |
| Part Number # |
A-N Size / Push-Lite Designation |
Nom. I.D. / Size | Max Burst Pressure | Vacuum Rating | Weight Per FT. |
| FRA-800004 | -4 | 1/4" | 350 psi. | 28 in. hg. | 0.09 ibs. |
| FRA-800006 | -6 | 3/8" | 300 psi. | 28 in. hg. | 0.11 lbs. |
| FRA-800008 | -8 | 1/2" | 300 psi. | 28 in. hg. | 0.18 lbs. |
| FRA-800010 | -10 | 5/8" | 250 psi. | 15 in. hg. | 0.19 lbs. |
| FRA-800012 | -12 | 3/4" | 250 psi. | 15 in. hg. | 0.24 lbs. |